Radiated Emission Laboratory

The Radiated Emission measurement facility at SAMEER-CEM is FCC (Fedral Communication Commission) listed for radiated emission measurements. Equipped with ferite lines Shielded Semi Anechoic Chamber for 10 meter measurement, full compliance 10 and 3 meter radiated emission measurements according to the most commonly used international standards (such as EN 55011, CISPR 11, CISPR 22, EN 55022, EN 50147-2, ANSI C63.4) can be conducted at the facility. Large units like small vehicles up to 3 ton and a volume of 3 meter diameter/2 meter height can be tested inside the chamber. The facility consists of a automated turntable(360) and automated antenna masts facilitating height variation from 1 meter to 4 meter. A fiber optic CCTV is provided for monitoring the equipment during the measurement. The At present the facility is capable of conducting radiated emission measurements up to 18 GHz. The shielding effectiveness of up to 120dB is attained inside the chamber.

Additionally a Shielded Anechoic Chamber for conducting 3 meter Radiated Emission measurements is also available at the center.

The Centre also maintains an Open Area Test Site (OATS) for conducting radiated emission measurement up to 10 meter. The OATS is FCC listed for 10 meter measurements.

The magnetic field measurements for the lighting equipments as specified to the International Standards CISPR 15 can be conducted at the facility. The measurement is done using 3-axis loop antenna developed and validated inhouse.

The Centre is equipped with the state-of-the-art test and measuring equipments comprising of different Electromagnetic Interference (EMI) Receivers covering the frequency range of 20 Hz to 26GHz, EMC Analyzers for the frequency ranges of 9 kHz to 2.5 GHz and 100 Hz to 3GHz, preamplifiers, etc.

Electric Field:

Frequency Range : 20MHz - 18GHz

Common Stds followed : CISPR 11, CISPR 25, CISPR 22 , FCC part 15 B &18 , BS EN 55022, BS EN55011, BS EN 61000-6-3, BS EN 61000-6-4, IEC 61000-6-3, IEC 61000-6-4, IEC 60601-1-2, IEC 62040-2, IEC 62052-11, BS EN 50021-4 , AIS 004, EN/ETSI 300 386, BS EN 50091-2, 95/54/EC, 97/24/EC, 2004/104/EC, FORD-ES XW7T-1A278-AC, IEC 61326

Magnetic Field :