|
EMCD Home » Test Facillty »Standards
List Of EMC Test Services Offered
The following standards are used for EMI / EMC Testing
Generic / Product Standards
Sl.No |
Standard |
Test Description |
| 1 |
BS EN 61000-6-1 |
Immunity for Residential, Commercial & Light Industrial Environment |
| 2 |
BS EN 61000-6-2 |
Immunity for Industrial Environment |
| 3 |
BS EN 61000-6-3 |
Emission standard for Residential, Commercial & Light Industrial environment |
| 4 |
BS EN 61000-6-4 |
Emission Standard for Industrial Environment |
| 5 |
BS EN 60601-1-2 |
Medical Equipment |
| 6 |
IEC 62040-2 &
EN 50091-2 |
EMC for Uninterruptible Power Supply (UPS) Systems |
| 7 |
EN 50130-4 |
Alarm Systems |
| 8 |
CISPR14 -1/
BS EN 55014-1 |
Emission requirement for Household Appliances, Electrical tools and similar electrical apparatus |
| 9 |
CISPR14 -2/
BS EN 55014-2 |
Immunity requirement for household appliances, electrical tools and similar apparatus |
| 10 |
CISPR15/
BS EN 55015 |
Lightning and similar equipment |
| 11 |
CISPR24 /
BS EN 55024 |
Immunity characteristics, limits and methods of measurement for information technology equipment |
Conducted / Radiated Susceptibility Standards
Sl.No |
Standard |
Test Description |
| 1 |
IEC 61000-4-2 |
Electro Static Discharge |
| 2 |
IEC 61000-4-3 |
Radiated ,radio frequency, Electromagnetic field |
| 3 |
IEC 61000-4-4 |
Electrical Fast Transient/Burst |
| 4 |
IEC 61000-4-5 |
High Energy Surge |
| 5 |
IEC 61000-4-6 |
Conducted disturbances, induced by RF fields |
| 6 |
IEC 61000-4-8 |
Power frequency magnetic field |
| 7 |
IEC 61000-4-9 |
Pulse magnetic field |
| 8 |
IEC 61000-4-11 |
Voltage dips, short interruptions and voltage variations |
| 9 |
IEC 61000-4-12 |
Oscillatory waves, Ring waves |
| 10 |
IEC 61000-4-13 |
Harmonics and inter harmonics |
| 11 |
IEC 61000-4-14 |
Voltage Fluctuations |
| 12 |
IEC 61000-4-17 |
Ripple on DC input power port |
| 13 |
IEC 61000-4-28 |
Variation of power frequency |
| 14 |
IEC 61000-4-29 |
DC dips, Variations and short interruptions |
Conducted / Radiated Emission Standards
Sl.No |
Standard |
Test Description |
| 1 |
FCC Part15 |
Radiated frequency devices |
| 2 |
FCC Part18 |
Industrial, Scientific& medical Equipment |
| 3 |
CISPR11 /
BS EN55011 |
Emission requirement for Industrial, Scientific& medical radio frequency Equipment |
| 4 |
CISPR22/ BS EN55022 |
Emission requirement for Information Technology Equipment |
| 5 |
IEC 61000-3-2 |
3-Phase<16A,Limits for Harmonic current Emissions |
| 6 |
IEC 61000-3-3 |
3-Phase<16A,Limitations of Voltage Fluctuations and flicker in low voltage supply systems |
Military/ ANSI Standards
Sl.No |
Standard |
Test Description |
| 1 |
MIL – STD 461C/D/E (Partial) |
EMI/EMC requirement for military equipment |
| 2 |
MIL – STD 285 |
Chamber Shielding Effectiveness |
| 3 |
MIL – STD 1377 (Navy) |
Cable Shielding Effectiveness |
| 4 |
MIL – STD 220A / CISPR 17 |
Measurement of the suppression characteristics of passive radio interference filters and suppression components |
| 5 |
ANSI C 63.4 |
Site attenuation of open area test site (OATS) |
| 6 |
ANSI C 63.5 |
Calibration of EMC antennas by standard site method (SSM) |
Automotive Standards
Sl.No |
Standard |
Test Description |
| 1 |
CISPR 12 |
Emission requirement for vehicles, motor boats and spark ignited engine driven devices |
| 2 |
CISPR 25 |
Emission requirement for the protection of receivers used on board vehicles, boats and on devices |
| 3 |
EEC 95/54/EC |
Radio Interference of (EMC) of vehicles and electrical/electronic sub-assemblies |
| 4 |
EEC 97/24/EC |
EMC of two or three wheel motor vehicles and electrical or electronic separate technical units |
| 5 |
ISO 7637-2 (Partial) |
Electrical disturbance for road vehicles by conduction and coupling |
| 6 |
SAE J1113-11 (Partial) |
Immunity to Conducted Transients on power leads |
| 7 |
SAE J1113-42 |
Conducted Transient Emissions |
| 8 |
AIS 004 |
Electromagnetic radiation from automotive vehicles |
| 9 |
Ford ES-XW7T-1A278-AC (Partial) |
Component and subsystem EMC |
|
|
|